Sanyo PLC-XM80 Owner's Manual

76Check the indicators for the projector condition.IndicatorsProjector ConditionPOWERgreenLAMPredWARNINGTEMP.redWARNINGFILTERorangeP-MANAGEMENTSTAND-BYblueLAMPREPLACEorangeThe projector is off. (The AC power cord is unplugged.)The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.The projector is operating normally.The projector is preparing for stand-by or the projectionlamp is being cooled down. The projector cannot beturned on until cooling is completed and the POWERindicator lights green.The projection lamp is being cooled down in the Powermanagement mode.The projector is in the Power management mode.Press the ON/STAND-BY button to turn on theprojector.The projector is operating normally• • • on• • • off• • • blinking at the normal rate(approx. 1 second ON,1 second OFF)• • • dim • • • blinking slow(approx. 2 seconds ON, 2seconds OFF)⁄⁄⁄Appendix• • • on (blue)❊ ❊ • • • blinking at the normal rate (blueand dim red) (approx. 1 secondON, 1 second OFF)❊ • • •blinking fast (blue and dim red)(approx. 0.5 seconds ON, 0.5seconds OFF)• • •blinking fast(approx. 0.5 seconds ON, 0.5seconds OFF)• • • on (red)❖❖ • • • dim (red)❖❖❖⁄❖⁄⁄⁄⁄⁄⁄• • • Differ according to conditions.⁄Indicators and Projector Condition❖ ❊