Sanyo PLC-XT35 Owner's Manual

Also see for PLC-XT35: Owner's manual Specification sheet Specification sheet Service manual Service manual

35Press the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Input Menu icon.1Use the Point ed buttons to move the red arrowpointer to the desired input and then press theSELECT button. The signal format menu appears.2Use the Point ed buttons to select the desired signalformat and then press the SELECT button.3Menu OperationWhen the RGB PC (analog) signal isconnectedRGB (PC analog)INPUT 1When the RGB PC (digital) signal isconnected.RGB (PC digital)When the HDCP video signal isconnected.RGB (AV HDCP)When the RGB PC signal is connected.RGBINPUT When the RGB video signal isconnected.VideoWhen the component signal isconnected.Component*AutoINPUT 3When the video signal is connected.Video*When the S-video signal is connected.S-video*When selecting Auto, the projectorautomatically detects an incoming videosignal and adjusts itself to optimize itsperformance. The projector selects theconnection in the following order:1. S-video2. VideoInput Source Selection* If the projector cannot reproduce proper video image, select asystem manually (see “Video System Selection” on page 36).* If the projector cannot reproduce proper video image, select asystem manually (see “Video System Selection” on page 36).When the RGB PC (scart) signal isconnectedRGB (Scart)Input MenuInput Selection