Sanyo PLC-XT35 Owner's Manual

Also see for PLC-XT35: Owner's manual Specification sheet Specification sheet Service manual Service manual

46WideProvide the image to fit the screen size.NormalTrueProvide the image in its original size. When the originalimage size is larger than the screen size (1024 x 768), theprojector enters to the panning mode automatically. Use thePoint ed7 8 buttons to pan the image. When adjusted, thearrows will turn red. When reached to the correction limits,the arrows will disappear.Provide the image to fit the wide video aspect ratio (16:9) byexpanding the image width uniformly. This function can beused for providing a squeezed video signal at 16:9.Full screenProvide the full screen image.Screen Size Adjustment (Computer Signals)Select the desired screen size that conforms to the input signal source.Move the red frame pointerto the desired function andpress the SELECT button.Screen MenuScreen Menu iconAdjust the screen scale and position manually with thisfunction.Press the SELECT button at Custom and the “Custom” isdisplayed on the screen for a few seconds and then theAspect dialog box appears.Scale H/V ........... Adjust the Horizontal/Vertical screen scale.H&V ................... When set to “On,” the aspect ratio isfixed. The “Scale V” appears dimmed andbecomes unavailable. Adjust “Scale H,”then the screen scale is automaticallymodified based on the aspect ratio.Position H/V ....... Adjust the Horizontal/Vertical screenposition.Common ............ Save the adjusted scale to all the inputs.Press the SELECT button at Common todisplay a confirmation box. To save thescale, press the SELECT button at “Yes.”When Custom is selected, the saved scaleis used.Reset ................. Reset the all adjusted values. Pressthe SELECT button at Reset to displaya confirmation box. To reset, press theSELECT button at “Yes.”Custom✔Notes:• When no signal is detected, “Normal” isset automatically and the Aspect dialogbox disappears.• The adjustable range for Scale H/V andPosition H/V is limited depending on theinput signal.Press the SELECT button atCommon or Reset, to display aconfirmation box.Screen Adjustment