Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Manual Brochure

Contents

10Using the moderator functionModerator operation1. A moderator starts up the Network Capture 5. On the application window, select a projector onthe projector list to use and then click Moderator registration button. The mode of the applicationwindow changes from "Normal mode" to "Moderator mode".Client operation2. Each client starts up the Network Capture 5. On the application window, select a projector which isindicated with "In Moderator mode" on the status column and then click Join moderator's groupbutton. The application window disappears.When exiting from the moderator's group, click Exit moderator groupon the popup menu appearing by clicking the Network Capture 5 iconon the task bar.Moderator operation3. The client's and moderator's nicknames or IP addresses of the computer appear on the client list ofthe application window of the moderator when the client joins into the moderator's group.4. The moderator selects a projector on the projector list and selects a client computer on the client listto display the client computer's screen.When you register the multiple projectors in the moderator's group, select a projector on theprojector in the moderator mode and click Moderator registration button to register it inthe moderator's group one by one.5. Click Start real time capture or One-shot capture button. The selected projector projects theselected client computer's screen on the screen.When you project the capture image with the multiple projectors, select projectors on theprojector list by holding the [Ctrl] key or [Shift] key.The moderator and the clients can start the meeting with Moderator function.Description of application windowColumn DescriptionStatus ......................... Indicates the projector's condition. On real time, On One-shot capture, On Standby, In Moderator mode, etc.User.............................Indicates the client name (nickname or IP address) used by the projector.Error ............................Indicates the error status during executing the real time capture or one-shot capture.Parameter set up ...Sets the parameter of capturing. Moderator's nickname (less than 63 characters) andmoderator's password (less than 15 characters) can be setup with this item. Also see the item"Parameter set up" (p.92) for other parameter setup.Moderator registration ...Register a moderator's groupDelete moderator group ...Quit a moderator's groupJoin moderator's group ..Join a moderator's group. Press this button after selecting the projector which is indicated with"In Moderator mode" on the status column.Start real time capture ..Capture (Project) the computer screen in real time. After the execution of "Start real timecapture", and the application window disappears.Terminate capture.....Terminate the real time capture.One-shot capture ......Copy and capture (project) the computer screen without modification. After the execution ofOne-shot, the application window disappears.* See item " 3. Names and function of the operating screen " (p.25) for other description of application window.Exit moderator's groupVersion information..Shut downModerator function