Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Manual Brochure

Contents

Safety instructionsCaution about Radio WaveThis unit operates in 2.4 GHz band, the same frequency band used for industrial, scientific, and medicalequipment (such as pacemaker), as well as amateur radio stations.Please read “Safety Instructions” section and make sure the following cautions.1. Be sure that there are no other devices in the area that may use the same frequency band asProjector.2. If any other devices are causing radio interferences, change the communication frequency channelor move to other location.Trademarks and CopyrightMicrosoft, Windows, and Internet Explorer are either registered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.Netscape Navigator and Netscape Communicator are registered trademarks or trademarks of NetscapeCommunications Corporation in the United States and other countries.Pentium is a registered trademark of Intel Corp. in the United States.Each name of corporation or product in this Owner’s Manual is either a registered trademark or atrademark of its respective corporation.Notes- The contents of this manual are subject to change without notice.- You may not copy the printed materials accompanying with the software.- We shall not be responsible for any damages caused by reliance on this manual.Expression/AbbreviationThe OS of the computer and the Web browser described in this manual is Windows XP Professional andInternet Explorer 6.0. In case of another OS or Web browser, some instruction procedures may differfrom the actual operation depending on your computer environment.Use of this manualThis manual does not provide the description of basic operation and functions for computer, webbrowser, projector and network. For instructions about each piece of equipment or applicationsoftware, please refer to the respective booklet.CAUTION IN USING THE PROJECTOR VIA NETWORKS● When you find a problem with the projector, remove the power cable immediately and inspectthe unit. Using the projector with failure may cause fire or other accidents.● If you remotely use the projector via networks, carry out a safety check regularly and takeparticular care to its environment. Incorrect installation may cause fire or other accidents.CAUTION IN USING NETWORK FUNCTION● SANYO Electric Co., Ltd. assumes no responsibility for the loss or damage of data, or damage ofthe computer caused by using this projector. Making back-up copies of valuable data in yourcomputer is recommended.