0Chapter 6 Basic setting and operationE-mail settingThis product has an E-mail function which can send an alert message to users or anadministrator if it detects an abnormality on the projector or run out of the life spanof the lamp. Click E-mail Setting on the main menu and follow the below steps.Item DescriptionSMTP server*1 ..........Sets server name or IP address of the SMTP server. (up to 60characters)SMTP server port ...Sets the SMTP server port. (from 1 to 65535)Administratoraddress ......................Sets E-mail address of administrator. (up to 95characters)Add e-mailaddress ......................Sets E-mail address of the user to send a mail when theprojector has an abnormality. (up to 95 characters)1 Setting SMTP server and administrator addressSet the server name or IP address of the SMTP server* 1 and administrator address. The administratoraddress is set to "Reply-To" address of the message sent from the projector.*1 The SMTP server is a server for sending E-mail. Please contact your network administrator to have this SMTPserver address. When the server name for SMTP server is used, DNS must be set up to activate the E-mailfunction.✐ If the projector sends an alert message due to the abnormality on the projector but the SMTP server is down insome other reason, the message will not be sent. In that case, the message "Unable to connect to server." will bedisplayed on the setting page. To clear this message, set up SMTP server address again.✐ To use the E-mail function, it must be set the DNS address on the Network setting page correctly.✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your network environment.✐ The projector does not send message to the address set in "Administrator address" text box. If you want to sende-mails to the administrator address, enter the administrator address into "Add e-mail address" text box.
