17InstallationConnecting the AC Power CordThis projector uses nominal input voltages of 100-120 V or200–240 V AC and it automatically selects the correct inputvoltage. It is designed to work with single-phase powersystems having a grounded neutral conductor. To reducethe risk of electrical shock, do not plug into any other type ofpower system.If you are not sure of the type of power being supplied,consult your authorized dealer or service station.Connect the projector with all peripheral equipment beforeturning the projector on.✔ Note:Unplug the AC power cord when the projector is notin use. When this projector is connected to an outletwith the AC power cord, it is in Stand-by mode andconsumes a little electric power.Connect the AC power cord (supplied) to theprojector.To the AC outlet.(00 - 40 V AC)NOTE ON THE POwER CORDAC power cord must meet requirement of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If supplied AC power cord does not match your AC outlet, contact your sales dealer.To power cordconnector on yourprojector.Projector side AC outlet sideGroundTo the AC outlet.(10 V AC)For the U S A and CanadaTo the AC outlet.(00 - 40 V AC)For the U KFor Continental EuropeCAUTIONThe AC outlet must be near this equipment and must beeasily accessible.L R