Sanyo PLC-XU300 Owner's Manual

Also see for PLC-XU300: Specifications Owner's manual Brochure Specifications Manual

Contents

Sanyo PLC-XU300 Owner's Manual Manual pdf 61 page image

61Cleaning the Projector CabinetCleaning the Projection LensUnplug the AC power cord before cleaning.Gently wipe the projection lens with a cleaning cloth thatcontains a small amount of non-abrasive camera lenscleaner, or use a lens cleaning paper or commerciallyavailable air blower to clean the lens.Avoid using an excessive amount of cleaner. Abrasivecleaners, solvents, or other harsh chemicals might scratchthe surface of the lens.Unplug the AC power cord before cleaning.Gently wipe the projector body with a soft dry cleaning cloth.When the cabinet is heavily soiled, use a small amount ofmild detergent and finish with a soft dry cleaning cloth. Avoidusing an excessive amount of cleaner. Abrasive cleaners,solvents, or other harsh chemicals might scratch the surfaceof the cabinet.When the projector is not in use, put the projector inan appropriate carrying case to protect it from dust andscratches.When moving this projector or while not using it over anextended period of time, replace the lens cap.Attach the lens cap according to the following procedures.Attaching the Lens Cap12Thread the string through the hole on the lens cap andthen tie a knot in the string to secure it in place.To pass the other end of the string into the hole on thetop of the projector and pull at it.Maintenance and Cleaning