37 ENGLISHControlsPC adjustmentClick PC Adj. on the main menu. This function is to adjust the signal fromthe computer connected to the projector to obtain the proper pictureimage on the screen.Item DescriptionCurrent mode...... Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode5which are the customized mode created by using the "Mode Store" function describedbelow.Auto PC adj..........Performs automatic adjustment.Fine sync. ..............Performs Fine Sync adjustment. (0 ~ 31)Total dots..............Adjust the number of total dots in the horizontal period.Clamp......................Adjusts the phase of the clamp. (1 ~ 127)Display areaHorizontal..........Adjusts the image area horizontally.Vertical ..............Adjusts the image area vertically.PositionHorizontal .......Adjusts the horizontal position of the screen.Vertical ..............Adjusts the vertical position of the screen.Reset.........................Resets the PC adjustments to the previous levels.Mode Store..........Stores the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-down menu.Mode Free ............Clear the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-down menu.
