Sanyo PLC-XU300A Owner's Manual

Also see for PLC-XU300A: Specifications Specification sheet Owner's manual Dimensional drawing Brochure & specs

Contents

Sanyo PLC-XU300A Owner's Manual Manual pdf 155 page image

19PJ NETWORK MANAGEROWNER'S MANUALCustomizing the status listChanging the status column indication1 Select Column selection from System menu. The col-umn selection window will appear.2 On the window, check the column name to be indi-cated on the status list. The mark [*] next to the column name indicates alertitem.3 To change the order of the display column on thestatus list, select a column you intend to change theorder and click To up or To down button.4 Click OK to close setting.When specifying the column width by numeric value, enternumber (0 to 9999) onto "Column width" text box.Column Description*Target name ............................Name of the network equipment*Group...........................................Group name*Connect......................................Status of connection to the network (Connected, Un-connected)*Drive time .................................Accumulated use time of the equipment*Power status............................Power status of the equipment (Normal(Power-on), Normal(Standby), PowerManagement, Power failure, lamp failure, etc.)*Input status..............................Input signal status (Signal, No signal, Signal interrupted)*Inside TemperatureA status....................................Status of inside temperature A (Normal, Warning, Error)*Inside TemperatureB status ....................................Status of inside temperature B (Normal, Warning, Error)*Inside TemperatureC status....................................Status of inside temperature C (Normal, Error)*External Temperaturestatus.........................................Status of external temperature (Normal, Warning, Error)*Lamp1 status ..........................Status of Lamp1 (Off, On, Error, Replace)*Lamp2 status ..........................Status of Lamp2 (Off, On, Error, Replace)*Lamp3 status ..........................Status of Lamp3 (Off, On, Error, Replace)*Lamp4 status ..........................Status of Lamp4 (Off, On, Error, Replace)*Lamp1 time..............................Used time of Lamp1*Lamp2 time..............................Used time of Lamp2*Lamp3 time..............................Used time of Lamp3*Lamp4 time..............................Used time of Lamp4*Filter status...............................Status of airfilter (Normal, Clogged)*Option Boxfilter status ............................Status of option box filter (Normal, Error, Clogged)*Filter time..................................Use time of airfilter*Option Boxfilter time................................Use time of option box filter The values in parentheses are typical value and they differ depending on the connected equipment. The [*] next to the column name indicates alert items.Customizing the status listSpecifies col-umn width