6Safety InstructionsOpenings in the cabinet are provided for ventilation. Toensure reliable operation of the product and to protect itfrom overheating, these openings must not be blockedor covered.CAUTIONHot air is exhausted from the exhaust vent. When usingor installing the projector, the following precautionsshould be taken.– Do not put any flammable object or spray can near theprojector, hot air is exhausted from the air vents.– Keep the exhaust vent at least 3’ (1 m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic parts. These areas willbecome hot while the projector is being used.– Do not put anything on the cabinet. Objects put on thecabinet will not only get damaged but also may causefire hazard by heat.Cooling fans are provided to cool down the projector.The fans’ running speed is changed according to thetemperature inside the projector.CAUTION IN CARRYING OR TRANSPORTINGTHE PROJECTOR– Do not drop or bump the projector, otherwise damagesor malfunctions may result.–When carrying the projector, use a suitable carrying case.–Do not transport the projector by courier or any othertransport service in an unsuitable transport case. Thismay cause damage to the projector. For informationabout transporting the projector by courier or any othertransport service, consult your dealer.–Do not put the projector in a case before the projector iscooled enough.Moving the ProjectorWhen moving the projector, replace the lens cap andretract adjustable feet to prevent damage to the lens andcabinet.When the projector is not in use for an extended period,put it into a suitable case with the lens side up.Air CirculationAir Intake VentAir intake VentExhaust Vent(Hot air exhaust)Air Intake VentDo not tilt the projector more than 30degrees from above and below.Do not point the projector up to project animage.Do not point the projector down to projectan image.Do not put the projector on either side toproject an image.Install the projector properly. Improper Installation mayreduce the lamp life and cause a fire hazard.Installing the Projector in Proper PositionExhaust Vent(Hot air exhaust)Do not tilt the projector more than 20degrees from side to side.20°20°30°30°
