31Computer InputPC System MenuPC System MenuComputer System SelectionThis projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, thisprojector automatically detects the signal format and tunes to project a proper image without any additionalsettings. (Signal formats provided in this projector are shown on pages 73-74)One of the following messages may appear when:The projector cannot recognize the connectedsignal conforming to the provided PC Systems.Auto is displayed on the System Menu boxand the Auto PC Adjustment function worksto display proper images. If the image is notprojected properly, a manual adjustment isrequired (pp.33-34).There is no signal input from the computer.Check the connection between your computerand the projector. (See “Troubleshooting” onpage 66.)Auto-----The preset system is manually adjusted in thePC Adjust Menu. The adjusted data can bestored in Mode 1-5 (pp.33-34).Mode 1PC Systems provided in this projector is chosen.The projector chooses a proper system providedin the projector and displays it.SVGA 1*Mode 1 and SVGA 1 are examples.1PC system can also be selected manually.Selecting Computer System ManuallyThe PC System MenuSelected system isdisplayed.Systems in thisdialog boxcan be selected.Customized Mode(1–5) set in thePC Adjust Menu(pp.33-34).Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or SELECT button.Use the Point ▲▼ buttons to select Systerm and thenpress the Point ► or SELECT button.Use the Point ▲▼ buttons to select the desired systemand then press the SELECT button.3