41Video InputVideo System Selection1 AV System Menu (Video or S-Video)AV System Menu (Component)If the projector cannot reproduce proper video image,select a specific broadcast signal format from among PAL,SECAM, NTSC, NTSC 4 43, PAL-M and PAL-N.PAL/SECAM/NTSC/NTSC4 43/PAL-M/PAL-NThe projector automatically detects an incoming videosignal, and adjusts itself to optimize its performance.If the projector cannot reproduce proper video image, selecta specific component video signal format among 480i, 575i,480p, 575p, 70p, 1035i and 1080i.AutoCOMPONENT VIDEO SIGNAL FORMATVideo or S-VideoComponentThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the systemmanually.AutoNote:The AV System Menu cannot be selected when selectingRGB (Scart).Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or SELECT button.Use the Point ▲▼ buttons to select Video , S-video orComputer 1(Component) and then press the Point ►or SELECT button.3 Use the Point ▲▼ buttons to select System and thenpress the Point ► or SELECT button. Use the Point ▲▼ buttons to select the desired system and then pressSELECT button.