Sanyo PLV-30 Owner's Manual

Also see for PLV-30: Service manual

21MODE buttonPress the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectComputer and press the SELECT button.COMPUTER MODESELECTING COMPUTER MODEMENU OPERATIONWhen selecting the Computer Mode, the Current Mode displayappears. It shows the information of the computer of the modeselected.CURRENT MODE DISPLAYCOMPUTERVIDEOProviding the information of the computer detectedby the projector.SELECTING COMPUTER SYSTEMAUTOMATIC MULTI-SCAN SYSTEMThis projector automatically tunes to most different types ofcomputers based on VGA, SVGA, XGA or SXGA (refer to“COMPATIBLE COMPUTER SPECIFICATION” on page 24).When selecting Computer, this projector automatically tunes tothe incoming signal and projects the proper image without anyspecial settings. (Setting of the Computer System may berequired when connecting some computers.)Note : The projector may display one of the following messages.The projector cannot discriminate or detect the inputsignal from the computer. Adjust and set thecomputer system manually. (Refer to page 22.)There is no signal input from the computer. Makesure the connection of the computer and theprojector is set correctly.(Refer to TROUBLESHOOTING on page 36.)Go to PC adj.No signalSELECT COMPUTER SYSTEM MANUALLYTo set the Computer system manually, select the mode on theON-SCREEN MENU.Displays the SYSTEMbeing selected.SYSTEM BOXThe system being selected.The systems onthese dialog boxescan be selected.Closes the SYSTEMMenu.Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSYSTEM and press the SELECT button. Another dialog boxCOMPUTER SYSTEM Menu will appear.Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to the system that you want to set, andthen press SELECT button.12DIRECT OPERATIONSelect COMPUTER mode by pressing the MODE button on theTop Control or the COMPUTER button on the Remote ControlUnit.