25COMPUTER MODEPress the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to select IMAGEand press the SELECT button. Another dialog boxPICTURE IMAGE ADJUSTMENT Menu will appear.Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to the item that you want to change bypressing the POINT UP/DOWN buttons. To change the value,press either the POINT RIGHT button or the POINT LEFTbutton.12ADJUST PICTURE IMAGE MANUALLYAdjust the picture as necessary to eliminate flicker from the display.(From 0 to 255.)The number of the total dots in one horizontal period. Adjust thenumber to match your PC image.Press POINT LEFT button to decrease contrast, and press POINTRIGHT button to increase contrast. (From 0 to 63.)Press POINT LEFT button to adjust the image darker, and pressPOINT RIGHT button to adjust brighter. (From 0 to 63.)Closes the PICTUREIMAGE ADJUSTMENTMenu.Move the arrow to the itemand press POINT RIGHT /LEFT buttons.Recalls the data previously adjusted.ResetStores the adjusted data in the memory.StoredCloses the PICTURE IMAGE ADJUSTMENT Menu.QuitMove the arrow to the color that you want to adjust. Press POINTLEFT button to lighten the color and press POINT RIGHT button todeepen the color. (From 0 to 63.)Each of the keys operates as follow.Fine syncTotal dotsWhite balance (Red / Green / Blue)ContrastBrightnessThe normal picture level is preset on this projector at thefactory and can be restored anytime you press the NORMALbutton (located on the Top Control or on the Remote ControlUnit). The “Normal” display will be displayed on the screen fora few seconds.NORMAL FUNCTIONNormalPress either POINT LEFT button or POINT RIGHT button to obtainbetter balance of contrast. (From 0 to 16.)GammaPICTURE IMAGE ADJUSTMENTSNOTE : The Fine sync. and the Total dots cannotbe fully adjusted when “RGB,”“HDTV1035i” or “HDTV1080i” is selectedon the SYSTEM MENU (P21).