Sanyo PLV-Z60 Owner's Manual

Also see for PLV-Z5: Service manual Mode d'emploi

38SettingPower off confirmationWhen this function is set to “On,” a confirmation dialog box with“Power off?” is displayed when turning off the projector (p.19).Press the Point 8 or OK buttons to switch On/Off.CaptureThis function enables you to capture an image being projected touse it for the starting-up display or interval of presentations.Select Capture and press the Point 8 or OK buttons. Theconfirmation box appears and select [Yes] to capture the projectedimage. The captured image will be displayed the next time theprojector is turned on.To cancel the Capture function, select [No].Capture✔Notes:• A signal from a computer can be captured up to XGA (1024 x 768).• The image that has been adjusted in the Image adj. Menu will not be reflected evenif it is captured.• When capturing the image that has been adjusted by the Keystone function, theadjusted data is automatically reset and the projector captures an image withoutkeystone correction.• If the Capture function fails to capture an image or stops capturing halfway, the On-Screen Menu returns to the Capture item.• The Capture function cannot be operated with unsupported signals.• When starting to capture a new image, the previously stored image is cleared even ifyou cancel the capturing.Select [Yes] tostop capturing.Select [Yes] to capturethe projected image.LogoThis function decides on the starting-up display from among thefollowing options. Press the Point 8 or OK buttons to switchbetween each option.User . . . . . Show the Image you captured.Default . . . Show the factory-set logo.Off . . . . . . . Show the Countdown display only.DisplayThis function decides whether to display the On-Screen displays.Press the Point 8 or OK buttons to switch between each option.On . . . . . . . . . . . . Show all the On-Screen displays. Use thisfunction when you want to project imagesafter the lamp becomes bright enough. Thefactory default setting is in this option.Countdown Off . . Show the input image instead of thecountdown when turning on the projector.Use this function when you want to projectthe image as early as possible even when thelamp is not bright enough.Off . . . . . . . . . . . . Hide the On-Screen Displays except;● On-Screen Menu● “Power off?”● “No signal” for Power management (p.39)● “Please wait ...”● Color management operation screen (p.31)● Panning dialog box when Normal throughis selected in the Screen Menu (p.35)✔Note:• “User” option cannot be selected without capturing an image.