Sanyo VCC-9500P Instruction Manual

Also see for VCC-9500P: Brochure Installation manual

Contents

Sanyo VCC-9500P Instruction Manual Manual pdf 23 page image

22Lens Settings (LENS)You can select the focusing mode from the following options.• Auto focus (AUTO)• Manual focus (MANU)For zooming operations, you can set the zooming speed andelectronic zooming options.You can select the focusing mode from the following two options.• Auto focus (AUTO)• Manual focus (MANU)b Auto focus (AUTO)Performs settings for the auto focus function.1 Use the joystick lever (xy) to select [FOCUS], usethe lever (vw) to select “AUTO y”, and press the[ENTER] button.The FOCUS SETTING screen appears.2 Use the joystick lever (xy) to select [LIMIT NEAR]and use the lever (vw) to select the nearestfocusing distance to the target object.Available settings: 10cm, 30cm, 50cm, 1m, 3m, 5m3 Use the joystick lever (xy) to select [SENSITIVITY]and use the lever (vw) to select sensitivity infocusing.Available settings:• HIGH: High sensitivity focusing• LOW: Low sensitivity focusingA Setting the focusing mode (FOCUS)B Setting the zooming operations (ZOOM)CAMERA yLENS yPAN/TILT yAUTO MODE yALARM yPRIVACY MASK yPASSWORD yLANGUAGE yOPTION yPRESETMENULENSFOCUS yZOOM yPRESETMENUABSETSETSETSETSETSETSETSETSETOFFBACKAUTOSETOFFBACKFOCUS SETTINGLIMIT NEAR mSENSITIVITYAREA yAF RETURNPRESETMENU1mHIGHSET30SOFFBACKZOOM SETTINGSPEEDEL ZOOMV-RESO.UPPRESETMENU3OFFOFFOFFBACK☞P24A Setting the focusing mode (FOCUS)Using the auto focus function in surveillance for longerhours shortens the life of the lens unit. If performingsurveillance for an extended period (24 hours or more),you are recommended to use manual focus.When the distance to the target object is less than orequal to 1m, focusing may become difficult.When focusing sensitivity is set to “HIGH”, the cameramay react to even slight movements of the target object.In this case, change the setting to “LOW”.LENSFOCUS yZOOM yAUTOSETFOCUS SETTINGLIMIT NEARSENSITIVITYAREA yAF RETURN1mHIGHSET30S