Sanyo VPC-E1403 Instruction Manual

41Setting the Date StampThe date of recording can be printed directly on the stillimages. This function must be activated before the image iscaptured. Once date and time are stamped on an image, theycan no longer be edited or deleted.Limitations of Date Stamp functions are as follows:• Available for still images only.• May slow down AEB/ Burst mode when Date Stamp isenabled in AEB/ Burst mode.• In vertical or rotated images, the date and time on yourimages still appear horizontally.To set Date Stamp1. From the Record menu, select Date Stamp.2. Use the or keys to go through the selection.3. Press the SET button to save and apply changes.Setting Auto ReviewThe Auto Review function lets you view the captured imageright after shooting it.If Auto review is On, the camera will display the capturedimage for 1 second on the LCD monitor.To set Auto Review1. From the Record menu, select Auto Review.2. Use the or keys to go through the selection.3. Press the SET button to save and apply changes.Recording VideosYou can record videos with the camera, the availablerecording time depends on the capacity of the memory card.Videos can be recorded until the maximum memory capacityhas been reached. However the length of a single video maybe limited (the limitation depends on the camera model).1. Slide the Mode switch to Movie mode.2. Focus your camera on the subject that you want to take.3. Press the Shutter button to start recording.4. Use the Zoom lever to zoom in and zoom out an image.5. To pause recording, press the key .6. To continue recording, press the key again.7. To stop recording, press the Shutter button.• When the camera stop recording due to reaching maximum capacity (4GB) for a singlevideo, simply press the Shutter button again to continue recording.• The camera will automatically stop recording when the memory capacity is full.• Digital zoom is not available while recording a video.• Sound cannot be recorded while using zooms (Spinning the Zoom lever.)• Power save is not available in video recording or pause recording.