Sanyo VPC-E1403 Instruction Manual

63TroubleshootingProblem Cause and/or ActionCamera does not turn on. The batteries may be exhausted. Charge or replace the batteries.Camera turns offautomatically. Press Power button to turn on the camera.LCD turns blank. Press any button except the Power button to turn on the LCD.Empty battery icon isdisplayed on the LCD, thenthe camera turns off.Batteries are exhausted, please replace or recharge.LCD monitor displays ‘Noimage’.There is no image file in the memory card. Image file format may not besupported.LCD monitor displays ‘Notavailable for this file’.Function is only available for specific file types. File format is notsupported.LCD monitor displays‘Memory full’.Memory card is full. Replace the memory card with a new one or deleteunnecessary images.LCD monitor displays ‘Filelocked’ This file is locked. Unlock the file. See "Protect" on page 49.LCD monitor displays ‘Cardlocked’.The memory card is protected. Remove the card and slide thewrite-protect switch to its unlock position.LCD monitor displays‘Format error’.The card may be damaged. You can either change the card or wipe toclean the connected points.LCD monitor displays‘Copy error’.The memory card is protected. Remove the card and slide thewrite-protect switch to its unlock position.The memory card is full. Replace card or delete unnecessary files.No image displays on theTV screen.Incorrect TV-out type was selected. Set the correct TV-out type to matchyour TV system.The lens got stuck up.Do not force the lens to go back.The type of the battery used may be incorrect or the battery power levelis too low. Change the battery or charge the battery before using thecamera.Battery temp. & lens temp.over timeAfter the attention sentence on LCD (Stop Movie Recording), Power shutDown is done.

/ 67

Related manuals for Sanyo VPC-E1403