Sanyo Vizzon HT32546 Owner's Manual

Also see for Vizzon HT27546: Owner's manual Quick and easy setup

5Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)The signal makes the difference!1INITIAL SIGNAL CONNECTIONSAnalog RF Antenna Connection• Connect a Cable signal (with or without a cablebox) or RF antenna to the Analog RF input.The analog tuner in this DTV receives AnalogAntenna signals, Analog Cable signals, or the RFoutput from a VCR or cable box.CATV FRANCHISE NOTE: Cablecompanies, like public utilities,are franchised by local govern-ment authorities. To receivecable programs, even withequipment which is capable ofreceiving cable channels, theconsumer must subscribe tothe cable company’s service. DTV will select the correct Antenna mode for the type of Analog RFsignal connected automatically. Use “Ana (Analog) Antenna Signal” in the Setup menu to changethe Antenna Mode. If you move the DTV to a new location, press the RESET key twiceafter connecting the signal and turning on the DTV.Analog Cable RFAntennaCableBoxDTV BackVCR BackNOTES: If you do not have a VCR, connect signal directlyto the 75 ohm terminal (UHF/ VHF/CATV).The only resolution available with any of theseconnections, regardless of the original content, isstandard analog.Digital (DTV) RF Antenna Connection• Connect an RF antenna to the Digital Antenna Interminal.The digital tuner in this DTV receives digital signalsfrom an antenna. Digital signals from a Set-top Box(STB) are received through the Component In jacks.This DTV can receive ANY resolution being broad-cast. However, ALL resolutions are converted to480i for display.RFAntennaDTV BackDTV BackVCR BackDTV BackVCR Back(Continued on next page.)OR OR