68Chapter 7 Controlling the projectorItem DescriptionContrast.....................Adjusts picture contrastBrightness ................Adjusts picture brightnessColor ...........................Adjusts picture color saturationTint ..............................Adjusts picture hueImage adjustmentThis function is to adjust the projected picture image and save the image mode. To store the adjustedvalue, click Store button, and to load the adjusted value, click Load button.Item DescriptionColor Temp. ..............Sets a color temperature mode.White BalanceRed, Green,Blue ......................Adjusts each white balance respectively.Sharpness .................Adjusts picture sharpness.* When the value of the white balance is changed, the color temp.indicates "Adj."Item DescriptionGamma........................ Adjusts brightness of darker part of the picture.Noise reduction .......Switches noise reduction modeProgressive scan .........Switches progressive modeReset...........................Resets the Image adjustment to previous levels.Store ...........................Stores the Image adjustment values. Select an item[Image 1 - Image 4] from the pull-down menu and clickStore button.Load............................Loads the Image mode. Se-lect an image mode from thepull-down menu and clickLoad button. There may notbe available mode depend-ing on the input mode asshown in the table left.Input sourceImage mode Video ComputerDynamic 4 4Standard 4 4Real * 4Cinema 4 *Blackboard(Green) 4 4Image 1 - 4 4 4✐ The mark "4" indicates the available image mode in the selectedinput source. The error message appears when the disabledimage mode indicated with "*" is selected.
