Sanyo Xacti Vpc-S880 Instruction Manual

EN-29* [ h ] Fl1* [ i ] Fl2* [ c ] Daylight* [ d ] Cloudy* [ ] ManualManual WBThis manually sets the white balance and stores it. Use of this is convenient when thewhite balance does not offer a good match. Before selecting [Execute] and before takingyour image, place a white paper in the scene and set the white balance manually.* Cancel / ExecuteISOThis sets the sensitivity for capturing images. When the sensitivity is raised (and theISO figure is increased), photography will become possible even in dark locations, butthe more pixelated (grainier) the image will appear.* Auto / 64 / 100 / 200 / 400 / 800MeteringThis sets the metering method for calculating the exposure.* [ o ] Average: The entire area of the screen is measured, and the exposure iscalculated.* [ q ] Spot: A very small portion of the center of the screen is measured, and theexposure is calculated.SharpnessThis sets the sharpness of the image that will be captured.* Hard / Normal / SoftSaturationThis sets the saturation of the image that will be captured.* High / Normal / LowCaptureMd.This sets the recording method at the time of capturing images.* [ Blank ] Single:Captures one image at a time.* [ ] Cont.: Permits continuous capture of up to 3 images.* [ ] AEB: Permits 3 consecutive images in the order of standard exposure,underexposure and overexposure compensation.Date PrintThe date of recording can be printed directly on the still images. This function must beactivated before the image is captured.* On / OffDigi. ZoomThis sets whether or not to use digital zoom at the time of photography.* On / Off