TC-Helicon VOICETONE HARMONY-G XT Quick Start Manual

Quick Start Guide(1) Input knob – Adjust the input gain so thatthe adjacent LED lights green while you sing,and occasionally lights orange during theloudest peaks.(2) Tone button – A single press activatesor deactivates AdaptiveTone to make yourvoice smoother and brighter, indicated bya solid LED when engaged. A double clickactivates or deactivates auto-chromatic pitchcorrection to provide subtle pitch support,indicated by a periodic flash of the LED whenengaged. When both effects are engaged,the LED will light solid except for periodicallyflashing off.(3) Guitar knob – Controls the guitar volumewhen the THRU jack is not used. The far left‘Auto’ position automatically balanced yourguitar volume with your voice. Just above the‘Auto’ setting is an ‘Off’ setting that mutesthe guitar.(4) FX knob – Adjusts the mix level of the effectselected with the FX button.(5) Harmony knob – Adjusts the mix level ofthe harmony and double effects.(6) Preset button – Press to cycle throughthe 5 presets shown in the display. Hold thePreset button to save changes made to thecurrent preset.(7) 48V LED – Hold the Manual and Doublebuttons for 2 seconds to engage phantompower for use with condenser microphones.(8) Manual button – Press to allow the guitarsignal to dictate the harmonies. Details of thisfunction are discussed in the full manual.(9) Double button – Press to simulate thesound of two of you singing in unison.(10) Voice 1/2 buttons – Press either of theVoice buttons to select a harmony interval.Details of this function are discussed in thefull manual. Hold both buttons to selectstereo or mono operation.(11) FX button – Press to cycle through theavailable effect styles for the currentpreset. When no LEDs are lit, the effects arebypassed.VOICETONE HARMONY-G XT(1) (3) (4) (5)(2)(6)(8)(9)(7)(12) (13)(11)(10)(18)(14)(15) (19)(17)(16)

/ 2

Related manuals for TC-Helicon VOICETONE HARMONY-G XT