8Connections and SetupButtons on the TVIf you cannot locate your remote, you can use the TV panelbuttons on your TV to operate many TV features.(POWER button) Turns the TV on or to standby mode.CH+/- Selects channels stored in the channel list or actsas the up/down arrow (▲/▼) through the menuitems.VOL+/- Increases/decreases the volume or acts as the right/leftarrow(◄/►) through the menu items ..(MENU button) Bring up the TV’s Main menu.(INPUT button) Selects the signal source .CHVOLExplanation of Jacks on TVThis section describes the jacks on the back panel of your TV. There areseveral ways to connect components.Ethernet (you must connect an Audio adpter cable withAUDIO OUT Adapter (you must connect an Audio adpter cable with two color jacks to this adpater jack first, red andwhite jacks for R AUDIO and L AUDIO connection)Use an RCA audio cable to connect your TV to a compatible audio receiver. (not availble in USB mode)VGA (PC IN) Connect your computer or other component with a VGA output to this jack using a 15-pin,D-sub cable.DVI/PC AUDIO IN (used for DVI/PC only) Provides audio connection when using HDMI/DVI INPUT 1 jack for DVI orwhen using VGA (PC IN).AV 2 IN adapter Lets you connect a component that has composite video jacks, such as a VCR or DVD player. (Notethat you must connect an Audio/Video adpter cable with three color jacks to this adapter jack first, Yellow jack for VIDEOconnection, red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources, be sure to use the LAUDIO INPUT.)ANTENNA/CABLE IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box.CMPT IN (Y Pb Pr) adapter Lets you connect a component that has component video jacks, such as a DVD player.(Note that you must connect a Component Video adpter cable with three color jacks to this adapter jack first: Green jackfor Y, Blue jack for Pb and Red jack for Pr )• Y Pb Pr (Component Video) Provides good picture quality because the video is separated into three signals. Usethree video-grade or component video cables for the connection.CMPT AUDIO IN adapter (Note that you must connect an Audio adpter cable with two color jacks to this adapter jackfirst, red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources, be sure to use the L AUDIOINPUT.)Ethernet AUDIO OUTadapter DVI/PCAUDIO IN AV 2 INadapterANTENNA/CABLE/SAT INCMPT INadapterCMPT AUDIOIN adapterPC IN