6. PROGRAMMING OPERATIONS EO1-110956-276.14 SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the name ofeach salespersons can be programmed in maximum 12 characters.ProgrammingCONDITION Any time outside a saleOPERATION Mode Lock: SET20 [@/FOR] |Salesperson Code| [ST] Character Entries [ST] [AT/TL]6.14 SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)1 to 99. . .*See NOTE 1 below.Repeat for other salespersons. * For sequentially programming codes, thecode number specification can be skipped.NOTES: 1. A maximum of 12 regular-sized or 6 double-sized characters may be programmed for a name. Acombination of both types is also available.2. Even if no name is programmed (i.e. skipping the Character Entries before the second [ST] key)for a Salesperson Code, that code can be used in sale entries. Then, auto-preset ID symbol “S Pxx” (xx = Salesperson Code) will be printed instead of a name on a receipt, etc.ex.) To program the following Salesperson Codes and names:Mode Lock: SETCODE NAME 20 [@/FOR].1 White 1 [ST] (Salesperson Code 1)507 [#] (W)608 [#] (h)609 [#] (i)704 [#] (t)605 [#] (e) [ST]2 Stacy 2 [ST] (Salesperson Code 2)503 [#] (S)704 [#] (t)601 [#] (a)603 [#] (c)709 [#] (y) [ST]3 Jansen 3 [ST] (Salesperson Code 3)410 [#] (J)601 [#] (a)614 [#] (n)703 [#] (s)605 [#] (e)614 [#] (n) [ST][AT/TL]TEC STORE1343 PEACH DRIVEPHONE : 87-6437Open 8:00am to 7:00pmClosed: every Wednesday12-19-1994 MON #3001P2001 White02 Stacy03 Jansen0047
