7. CASHIER KEY OR CASHIER SIGNING OPERATIONS EO1-110957-37.2 CASHIER KEY METHOD (Hardware Option)4Light to indicateON-status1 2 37.2 CASHIER KEY METHOD (Hardware Option)When the [LOG/RECEIPT] (or [LOG]) key is not installed, the Push-stay Cashier Keys may be provided at theside of the Mode Lock:Push-stay Cashier Locks and KeysCashier Locks 1 to 4 Cashier keys 1 to 4Each key is assigned to each cashier. The register will not operate in the “REG”, “MGR”, or “ - ” mode unlessone of these keys is inserted and pushed on or pushed-and-locked at the corresponding Cashier Lock. The lightis lit when the key is in the ON-status.Each of the keys may be inserted and pulled out in the neutral position marked with “1” to “4” in the above figure,and two ways are provided to set the Cashier Key to ON status:PUSH-ONWhen simply pushed on and released,the Cashier Key is set to ON status. This ON condition will be cleared byany of the following conditions:1) when no key-in operations follow in three seconds.2) when the transaction is finalized.3) when another Cashier Key is pushed-on when outside a sale.4) when the Mode Lock is turned to another position.PUSH-AND-LOCKWhen pushed and turned to the right, the ON status is locked until it is turned back to release and anotherCashier Key is set to ON.When another Cashier Key is attempted to push-and-lock, the register will entirely be locked.If a Cashier Key has already been set to ON and a sale is under way, another Cashier Key will be disregardedif attempted to ON.Under the CASHIER KEY METHOD, no receipts are issued, nor will the drawer open by setting a cashier key tothe ON status.The multi-drawer feature may be taken with the Push-stay Cashier Keys. In this case, the drawers 1 and 2 areassigned to the cashiers of Cashier Keys 1 and 2. No drawers are assigned to the cashiers of Cashier Keys 3and 4.The “SIGN ON” triangular lamp will not be lit in any occasion under the CASHIER KEY METHOD.The light attached to each Cashier Lock will be lit instead.
