– 34 –EO1-11113Using TKB-1 (Programming Keyboard; hardware option)Shift Keys (1 to 4), Shift Lock KeyUsed to designate the shift of the character keys. Each character has three different characters, eachof which is designated by the Shift Key 1 to Shift Key 3. (The Shift Key 4 is not used for the FS-1650series models.)Shift Key 2 and Shift Key 3 are effective for one following character only. After that, the Shift 1 mode isautomatically regained.The Shift Lock Key is used to hold the shifted status for a series of characters. To change the shiftedstatus locked by the Shift Lock Key, one of the Shift Keys (1 to 3) must by pressed prior to the characterkey depression.Character KeysUsed to enter alpha/numerics as characters. In setting a name or message, simply depress thecorresponding character key here, instead of the ECR keyboard.ex.)A ä "A" is entered in the Shift 1 mode.Operate: ([SFT 1]) → [A ä]"a" is entered in the Shift 2 mode.Operate: [SFT 2] → [A ä]"ä" is entered in the Shift 3 mode.Operate: [SFT 3] → [A ä]The numeric keys [1] through [0] (on the second row from the top) are used as character keys (i.e. theentered number will be part of the name or message to be printed).Also note that those numeric keys may be entered in the Shift 1,2 or 3 mode.SFT1SFT2SFT3SFT4SFTLOCK! ?1Q ÄA äZ âII £2WÖS öX ê#3E ÜD üC ç* $4R ÆF æVé%5T ŒF œB è&6Y ÅH åN ú’ :7U ÑJ ñM á] +9OL Ø. óCLEAR[X]CODEAT/TLSTUmstelltasten (1-4)und FeststelltasteSchriftzeichen-TastenHINWEIS:Funktionstaten(HINWEIS)- =0PSPACE[ /8I DK ß, í[CLEAR]=[KORR][AT/TL]=[GEG/TL][ST]=[ZWS]Shift Keys andShift Lock KeyCharacter Keys Function Keys
