TEC EO1-11099 Owner's Manual

Contents

TEC EO1-11099 Owner's Manual Manual pdf 54 page image

– 48 –EO1-11113(2) Auto Scale With Tare(3) Manual Scale Entry (It may be prohibited by a program option.)(4) Return or Void Manual Scale Entry (It may be prohibited by a program option.)[RTN MDSE] for Return[VOID] for VoidLISTING CAPACITY OPENFor Department and PLUsDepress [LC OPEN] (or [OPEN]) prior to or any time during an entry of an open-department, open-PLU,or preset-open department or PLU sequence (including REPEAT and QUANTITY EXTENSIONentries). Please note that the [LC OPEN] or [OPEN] key must be pressed, at latest, before the final keyof the entry sequence. The High Amount Limit for the department or PLU will be extended with two higherdigits, and the Low Amount Limit will be extended with one lower digit. For entering an amount stillexceeding these limits, you must call for a Manager Intervention.For Media Tender AmountsDepress [LC OPEN] (or [OPEN]) before or after the amount but Media Key. The High Amount Limitfor the media tendering will be extended with one higher digit. In need of still exceeding this limit, youmust call for a Manager Intervention.For Amounts through [DOLL DISC], [VND CPN], [STR CPN], [BTL RTN]To exceed their limits, you must always call for a Manager Intervention. The [LC OPEN] or [OPEN] keywill not be effective. As for the [STR CPN] key only, the amount is limited by both High Amount Limitof the department through which the store coupon amount is entered and the amount limit for [STRCPN]. That is, when an amount cannot be entered using [LC OPEN] or [OPEN], you must call for aManager Intervention.SELECTIVE ITEMIZER (SI) STATUS MODIFICATIONDepress [SI/M] (or [SI1/M] and/or [SI2/M]) for entering the required Department or PLU item, the same wayas [LC OPEN] is operated for Departments and PLUs. The Sl-net status is reversed to non-net status, andvice versa.TAX STATUS or FOOD STAMP STATUS MODIFICATIONDepress [TX/M] (or [TX1/M], [TX2/M], [TX3/M], [TX4/M], [GST/M]), in the same way as [LC OPEN] isoperated, prior to or any time during the entry sequence of the required Department, PLU, or any other tax-status-programmable item ([DOLL DISC], [%-], [%+], [STR CPN], [VND CPN], [BTL RTN]). The taxablestatus is reversed to non-taxable, and vice versa. The [FS/M] key operates the same to reverse from theFood Stampable status to non-stampable, and vice versa, of the required item.to be continued to the arrows marked with “(M)” inthe above three operation sequences of the AutoScale Entry.| Tare Table No. | [TARE]to be continued to the top of the “Manual Scale Entry”sequence above.to be continued to the arrows marked with“(M)” in the above three operation sequencesof the Auto Scale Entry.| Net Weight | of the item [SCALE]1 to 99999(unit: g or 1/100 LB. For example, enter 5 for 0.05LB.1 to 9