4. PROGRAMMING OPERATIONS EO1-111494. PROGRAMMING OPERATIONS4- 14. PROGRAMMING OPERATIONSThis chapter is provided for the store programmer or the store manager who may have to change theprogrammed data of the MA-1535 series ECR on the daily, weekly, or monthly basis. Usually, all thebasic program data required for your store should be set before delivering the product by your localTOSHIBA TEC representative. However, in need of changing or adding program data, please refer tothis chapter. It is also recommended to read the OPERATOR’S GUIDE as well as other chapters ofthe MANAGER’S GUIDE in order to thoroughly understand the descriptions in this chapter. If theseare any unclear points or program data other than listed here must be changed or added, pleasecontact your TOSHIBA TEC representative.Table of Programming OperationsOperation Control LockPosition Submode PageBasic Key Functions --- --- 4- 2Character Entry Method --- --- 4- 3Condition Required for Programming Operations --- --- 4- 5Store Message and Commercial Message Programming SET 01 4- 6Cashier Code and Name Programming SET 02 4- 8Department Table Programming SET 03 4-11PLU Table Programming SET 04 4-14Time Setting or Adjustment SET 05 4-17Date Setting or Adjustment SET 06 4-18Department Group Name Programming SET 13 4-18Link-PLU Table Programming SET 25 4-19PLU Preset-Code Key Setting SET 27 4-20PLU Group Programming SET 29 4-20Advertisement Message Programming SET 31 4-22Function Key (Combination Key) Setting SET 34 4-22PLU Cashier Report Setting SET 35 4-23%+ and %- Preset Rate Setting SET 36 4-24Foreign Currency Exchange Rate Setting SET 37 4-25+ (Amount Charge) and – (Amount Discount) Preset Setting SET 38 4-26Manager Pass Code Programming SET 39 4-27Register No. Setting SET 43 4-28Age Limit Setting SET 55 4-31Tare Table Setting SET 56 4-32General Unit Weight Setting SET 57 4-32PLU Stock Loading or Changing X or Z 90 4-28
