13. SPECIFICATIONS EO1-1114913. SPECIFICATIONS13- 113. SPECIFICATIONSItem DescriptionSize 410 mm (width) x 430 mm (depth) x 335 mm (height) (height includingrubber feet)Weight 12.5 kgPower Requirement: AC 117V±10%, 60 Hz±10%, 0.46AAmbient Temperature 0°C to 34°CRelative Humidity 10% to 80% (No condensation)Memory Protection Long lasting rechargeable lithium battery is provided.Paper Width 57.5±0.5mmOuter Roll Diameter Max. ∅80mmThermal paper rolled with the print side facing outside.Paper TypeOnly paper rolled onto a core is acceptable, however, the paper endshould not be pasted to the core.Recommended paper type: KF50 (KANZAN)TF50KS-E2C (Nippon Paper Industries)P-350 (KSP)CAUTION!Use only paper which meets specified requirements. Use of non-specified paper may shorten thehead life of the printer, resulting in problems with print quality, cause a paper feed failure or shortenthe cutter life. All paper should be handled with care to avoid any damage to the paper. Read thefollowing guideline carefully.• Do not store the paper for longer than the manufacturer’s recommended shelf life.• Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct sunlight,high temperature, high humidity, dust or gas.• A contact of chemical or oil may discolour or erase the printed record.• Rubbing the paper hard with nail or hard object may discolour the paper.• The paper end should not be pasted to the core.For further information please contact your authorised TOSHIBA TEC representative or authorisedpaper manufacturer.
