TEC Sterling G-Series Owner's Manual

Also see for Sterling: Owner's manual Owner's manual

Contents

TEC Sterling G-Series Owner's Manual Manual pdf 11 page image

General OverviewNOTICE: THE BURNER VENTURI TUBES SHOULD BEINSPECTED FOR SPIDER WEBS AND OTHEROBSTRUCTIONS PRIOR TO EACH USE. IF ANYTHING ISFOUND, CLEAN THE TUBES COMPLETELY. A CLOGGEDTUBE CAN LEAD TO A FIRE BENEATH THE GRILL.NOTICE: NEVER OPERATE THE STERLING G-SERIESGRILL WITHOUT THE RADIANT GLASS EMITTERSPROPERLY INSTALLED AS DESCRIBED ON PAGE 5.THE BURNERS SHOULD NOT COME IN CONTACT WITHWATER OR OTHER CLEANING FLUIDS, WHICH CANDAMAGE THE BURNERS, CAUSING THEM TOFUNCTION IMPROPERLY.Burner Ignition and OperationProcedure:1. If ignition does not occur in 5 seconds, turn burnerto OFF, wait 5 minutes, and repeat lightingprocedure.2. Open the grill hood. Ensure the Gas Valve is closedand that the top of the cooking grid is not covered.3. For LP gas, open the Gas Valve on the Cylinderusing the Handwheel.(See Figure 2, Page 7.)For Natural gas, open the gas valve in the main line.4. Depress and rotate the Burner Output Knob toHIGH. (See Figure 5.)5. Slowly rotate Spark Igniter knob clockwise twice andcheck for flame. If flame is not present turn BurnerOutput Knob to OFF and wait 5 minutes. Repeatsteps 4 and 5.6. For maximum cooking speed and searing intensity,maintain the Burner Output Knob at HIGH for 1 to2 minutes with the hood open, then close the hoodand continue operation at HIGH for an additional 7to 9 minutes to accomplish a total preheat time of 8to 10 minutes on HIGH. For slow cooking, maintainBurner Output Knob at HIGH for 3 to 5 minuteswith the hood open. Then, rotate Burner OutputKnob to desired cooking level.7. To extinguish the flame, depress and rotate the BurnerOutput Knobs to OFF.Operation9Push Button Spark IgniterLOWHIGHFigure 6. Grill Knobs and Igniter ButtonFigure 5. Burner Output KnobBurner Output KnobBurner Output KnobBurner Output Knob