Tait TB7300 Installation And Operation Manual

Also see for TB7300: Installation and operation manual Installation and operation manual User guide User guide Installation and operation manual

Contents

Tait TB7300 Installation And Operation Manual Manual pdf 37 page image

TB7300 Installation and Operation Manual Connecting to the Base Station 37© Tait Limited November 20174.4.8 Preparing to Download FirmwareNew versions of base station firmware are remotely downloaded to basestations from a package server (a web server application). You can set up asingle computer to be the central package server for all the base stations onyour network, using a web server of your choice. Tait also provides theMongoose1 web server as part of the base station firmware package for usewith a temporary package server, such as a laptop.The base station firmware package can be downloaded as a zip file fromthe Tait support website.This procedure describes using the Mongoose web server.Installing theFirmware Package The installation procedure copies files into a folder and adds items to theWindows Start menu (Start > Programs > Tait Applications > TB93002 ).From the Start menu you can then access the Help, licenses, manuals andrelease notes for each firmware package, and also start Mongoose.You do not have to install Mongoose to make it work, because it is aself-contained executable file. Once started, it will run in the back-ground until stopped, or the computer is shut down. Mongoose mustalso run from the same folder as the firmware files.1. Save the zip file to a suitable location on the hard drive of the pack-age server computer.2. Extract the zip file, then navigate to the root folder and double-clickTB9300.msi to run the Windows installer.Notice Tait recommends that the maximum length of the path to thelocation of the extracted files is 100 characters. Using a longer path maycause the files to be extracted incorrectly.Setting Up a CentralPackage Server It is beyond the scope of this manual to describe the exact procedure forsetting up a central package server for any particular network. Tait expectsthat each customer will configure their own package server according to therequirements for their network.However, you do need to configure each base station with the IP addressand port of the package server computer.1. Log in to the base station and select Configure > Base Station >Miscellaneous.2. Under Package server, enter the IP address and port number of thepackage server.1. Mongoose runs on Windows only.2. The TB7300 is designed to use the same firmware and download systemas the TB9300.