Tait TM8260 Installation And Programming Manual

Also see for TM8260: Operator's manual Operator's manual User guide Getting started guide

Tait TM8260 Installation And Programming Manual Manual pdf 13 page image

TM8260 Installation and Programming Guide Preparing the Installation 13© Tait Limited October 20142.3 Hardware and Firmware Compatibility2.4 Installation ConsiderationsInspect the vehicle and determine the safest and most convenient positionfor mounting the radio bodies and control head, and routing the variouscables. The radio bodies must be less than 4.9ft (1.5m) apart.Notice If using accessories that do not provide IP54 protection (forexample, a crossband cable, control-head interface box, or hand-heldcontrol head remote interface box), choose a mounting position awayfrom water, dust, and other environmental hazards.Radio FWaBody remoteinterface(TMAC31-0T)HWHead HW Head remoteHW PC softwareTM8260 withone graphical-display controlheadRadioapplication andDSP firmwarev4.02, bootcode v1.07HardwaresubassemblyXMAC31revision 002b ,and PCB 220-01720-05HardwaresubassemblyXMAC40revision 009 bHardwaresubassemblyXMAA03-03revision 003b ,and PCB 220-01721-04TM8200ProgrammingApplication v4.01 orTM8200/TM9300/TP9300ProgrammingApplication, v1.03c,TM8000 CalibrationApplication v4.03TM8260 withtwo graphical-display controlheadsTM8260 withone hand-heldcontrol headRadioapplication andDSP firmwarev5.02, bootcode v1.07HardwaresubassemblyXMAC70-MArevision 002 b,and PCB 220-02149-05N/A TM8200ProgrammingApplication v5.10 orTM8200/TM9300/TP9300ProgrammingApplication, v1.03c,TM8000 CalibrationApplication v4.03TM8260 withtwo hand-heldcontrol headsNot currently supported.a. Firmware of all devices (heads and bodies) in the radio systemb. For more information on how the hardware subassembly revision number relates to your serial number, contactyour regional office or Tait Technical Support (see page 2).c. Software version described in this document.