TM9300/TM9400 Installation Guide Installation Options 13© Tait Limited December 20152.2 Remote Control HeadThe T02-00061-1xxx remote head kits and the T02-00061-2xxx remotehead upgrade kits can be used to install the graphical control head remotelyfrom the radio body.The remote head kits provide a complete remote head whereas the remoteupgrade kits provide a remote control head interface which is fitted to anexisting local control head.Kits for remote head installations < 20ft (6m) contain one remote cable andno control head interface box. Kits for remote head installations > 20ft(6m) contain two remote cables and one control head interface box.The following diagram summarizes how the components are installed.Refer to the installation instructions (402-00088-xx) provided with thesekits for full details.remote head remote U-cradle (incl. screws)remote control head interfaceremote cable remote body interface control head interface box(incl. power cable)remote headremote bodyinterfaceto antennato power supplyto external speaker(optional)radio bodytopowersupplycontrol headinterface boxto external I/O(optional)remote cable<20ft (6m)Remote head installations <20ft (6m) Remote head installations >20ft (6m)remote cable<98ft (30m)to SYSTEM connectorradio bodyremote cable<20ft (6m)to HEAD 1 connector