Takara Belmont YUME Installation Instructions Manual
Also see for YUME: Operating instructionsQuick operation guideInstallation instructionsOperating instructions
              | |
-5-5. Installation Instruction1. UnpackingRemove nails from lower part of wooden crate.Lift up the upper potion of wooden crate.Chair will be left on the skid.2. Remove the pump cover.1. Remove the screws and remove maintenance cover,base cover left and right from main body.2. Remove the oil plug with red tag from oil reservoir.3. Plug the unit power supply plug in to thesuitable power supply outlet.4. Turn on the main switch located on the left sideof base.5. Keep depressing UP button of foot switchuntil the seat is lifted up to the end.6. Turn off the main switch7. Unplug the unit power plug from power supply outlet.5-1. Preparations for InstallationsNailsNailsOil Plug with Red TagMaintenance CoverBase Cover(R)Base Cover(R)Oil ReservoirMain SwitchFoot SwitchNote : Do not remove the unit from the palletuntil the unit fixing position is ready.Holding the Carriage Jig and place it atplanned location. Do not carry by holdingthe body or basin.5-2. Installation of the Carriage Jig1. Fix the Jig A to the base.(M10 x 30)2. Fix the Jig B bracket to the base.(M10 x 50)3. Attach the Jig B support bar to theJig B bracket.4. Attach the Jig B to the Jig B support barand tighten the nuts.(M16)CAUTIONDo not turn on power during installation.Base1 Jig A2 Jig B Bracket4 Jig B3 Jig B Support BarScrewsM10 x 30ScrewsM10 x 50 |
Related manuals for Takara Belmont YUME
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine