130MAINTENANCEWhen RequiredTravel levers, blade lever and pedals1. Remove the floor mat (1).2. Remove the lower mount section of theboot (2) and roll it up.3. Loosen the bolts and remove cover (3).4. Use the grease gun to supply grease tothe grease nipples (4).5. Wipe off the expelled grease.6. Reinstall the cover and floor mat, followingthe removal procedure in reverse order.7. Tilt up the platform.Refer to “Tilting Up the Platform”.8. Use the grease gun to supply grease tothe grease nipples (5).9. Wipe off the expelled grease.Tilting Up the PlatformFor inspection and maintenance, the platformis designed so that it can be tilted up.WARNING¡¡¡¡¡Raising or lowering the platform whilethe engine is running may cause themachine to move, and cause seriousinjury or death. Stop the engine beforeraising or lowering the platform.¡¡¡¡¡When the platform is tilted up, supportit firmly with the stopper to prevent itfrom falling.IMPORTANT: Lower the workingequipment to the ground before raisingthe platform. If not avoided, could resultin the boom from touching the cab.Raising (Tilt up)1. Select a firm, level surface, set themachine to the posture shown in thediagram above, ground the workingequipment, then stop the engine.2. Raise the safety lock lever(s) to engagethe lock.Close the cab door (cab).G4G02414 3 2 4 5G4G0251 4 2 4 355
