246OPTIONSINSPECTION AND MAINTENANCEInspection and maintenance interval............................ Every 250 hoursCleaning the CondenserCAUTIONCleaning the condenser with highpressured water may damage it. Cleanthe condenser gently.If the condenser is dirty, heat will notdischarge properly. Wash dirt off thecondenser with water.1. Open the engine hood.2. Clean the condenser.Inspecting and Adjustingthe Air Conditioner BeltInspection and maintenance interval... After first 50 hours (New machines only)IMPORTANT: Do not let any oil or greaseget on the belt, as it will cause the belt toslip, shortening its service life and reducingthe air conditioner’s cooling capacity.If the belt is slack, it will slip and vibrate,shortening its service life and reducing theair conditioner’s cooling capacity. The beltshould also not be too tense. Adjust the belttension to the standard value (approximately8 mm or 0.3 in).Air Conditioner (TB135 / TB145)< TB135 >< TB145 >G4G020G4L01523411234G4L016K3L03112341
