TallyGenicom 6300 Series Maintenance Manual

Also see for 6306: Specifications Brochure Quick start guide Operator's manual Specifications

Contents

TallyGenicom 6300 Series Maintenance Manual Manual pdf 18 page image

6300 Series Maintenance Manual121.5 Consumables1.5.1 RibbonsThe 6300 Series uses a ribbon cartridge that is incompatible with some previous Tally products(Reference Tally Specification 613184). This cartridge is designed to significantly increase thelife of the ribbon, reducing the cost of ownership of the product. This ribbon also has increasedreliability due to the incorporation of ribbon fault detect and skip over weld. The ribbon alsomaintains much more uniform print density over its useful life due to the incorporation of a pumpre-inking system. This system supplies ink to the ribbon based on the amount of printing that hastaken place, and separates the re-inking and ribbon motion functions. This results in morecontrollable and predictable re-inking, with attendant improvements in print quality and reliability.The 6312 may use the 60 or 250 million character pump re-inking ribbon cartridges. The 40million non re-inking ribbon may also be used.The 6306 uses a standard 40 million character non re-inking ribbon cartridge without the skip overweld feature.All cartridges are designed for easy access and loading. Ribbon lifetimes are based on printing a 7X 5 upper case rolling ASCII pattern at 40% density on 18-pound bond paper1.5.2 FormsThe printer is designed to use continuous sprocket feed type paper, with 2.8 to 18.7 inches (71 to475 mm) total width and 3 to 12 inches (76 to 305 mm) in length. One to six part paper may beused. Maximum form pack thickness shall be .025 inches. Reference specifications: ISO 2784,DIN 9771, DIN 6721, Tally 604561 and 608925.1.6 AccessoriesThe following accessories are available: Service Tool Kit Power CordsSee 614087 Product Features Index for part numbers.