Chapter 7 Configuring the AS/400 for Printing106Connection Type (CNNTYPE)Specify this value as *IP.Destination Type (DESTTYP)Specify *OTHER. *OTHER is a performance enhancement, inwhich data is not required to be transformed again if theconnection is interrupted and allows printing of multiple copies.Transform (TRANSFORM)Specify this value as *YES.Manufacturer Type (MFRTYPMDL)Select a manufacturer type and model. This is the name of theWSCO. Select *IBM6400EP for Epson emulation or*IBM6400PR or *IBM42023 for Proprinter Emulation.TroubleshootingThis installation procedure assumes that the PrintNet is configuredwith the correct IP address, subnet mask, and gateway (if required).In addition you can also ping and telnet to the PrintNet.Print an E-net Test Page to verify the Ethernet settings.See “Printing an Ethernet Test Page” on page 24.The default PrintNet queue name is d1prn, however, the name canbe changed. Substitute the changed name for the RMTPRTQparameter. To verify the queue name, print an E-Net Test Page ortelnet to the PrintNet and perform a “list dest” command.Internet address (INTNETADR)Specify the IP address of the printer.
