Chapter 1 Conventions Used in this Manual206. PrintNet in Auto mode in 10mbps Half Duplex environment(determined using 10 mbps Half Duplex hub)Use auto-negotiation to the highest common local and remotecapability, i.e. 10 mbps Half Duplex in this case.PORs to 10 mbps Half Duplex. Resets to 10 mbps Half Duplex.Reconnection at switch maintains 10 mbps Half Duplex.NOTE: With parallel detection, only speed can be determined. Theduplex mode sets to half duplex.Conventions Used in this ManualAll uppercase print indicates control panel keys.Example: Press the CLEAR key, then press the ONLINE key.Quotation marks (“ ”) indicate messages on the Liquid CrystalDisplay (LCD).Example: Press the ONLINE key. “OFFLINE” appears on the LCD.Command syntax and examples are formatted as follows:• The Courier font in boldface indicates commands that youtype. For example:At the prompt, type:ping ftp.CompanyWebsite.com• Regular Courier font indicates references to command syntaxand output. For example:The ftp.CompanyWebsite.com site is working properly.• Variable values are shown in italics in command syntax, output,and in text. For example:ping ipnameThe ipname is working properly.
