TallyGenicom LA650 Quick Start Manual

Also see for LA650+: Product guide Specifications User guide User guide

TallyGenicom LA650 Quick Start Manual Manual pdf 20 page image

Paper handling Quick start guide18Paper handling This section describes how to set the paper type, load fanfold paper and singlesheets, transport paper and move the paper to the tear position. Changing the paper type You can change the paper type either from an application program, by means ofthe paper path quick selection feature or in the Setup menu. In this section, thequick selection feature is described; for detailed information on how to make thissetting via the Setup menu, refer to the User Guide on the Online CD-ROM.On some printer models, the single sheet paper source cannot be selected sincethese models are not designed for manual single sheet feeding.Make sure that the printer is in offline mode (Pause); press the Online key, if nec-essary.Press the Park (1) key. If fanfold paper is loaded in the printer, it is fed to the tearposition. The text Tear paper off appears in the display. After having torn off thepaper, press any key. If a single sheet is loaded in the printer, it is ejected.Use one of the marked keys to select the desired paper path, for example,Single (2).The display shown here may vary according to the chosen paper options.If you do not make a selection within 5 seconds, the menu is closed.The printer returns to offline mode. The display alternates between the basic menuand the menu in the following figure:Insert a single sheet (for the procedure, see “Single sheets”, page 22).Press the Online key to set the printer to ready status. When the printer receivesdata from the computer, the single sheet is automatically loaded. Press the Load(4) key to load the single sheet before starting the printout.Pause Front1Park LF/FF OnlineSetup21 3 4Single Front1OnlineSetup21 3 4Load paper fromSingle OnlineSetup21 3 4Ready SingleM1 EPS Load OnlineSetup21 3 4Quick Start-en.fm Seite 18 Donnerstag, 17. Juni 2004 9:36 09