TallyGenicom LA650 Quick Start Manual

Also see for LA650+: Product guide Specifications User guide User guide

TallyGenicom LA650 Quick Start Manual Manual pdf 28 page image

Settings Quick start guide26Settings This section describes how to set the tear position, the first printing line, the printhead gap as well as the font selection and the character density. Setting the tear position If the tear position of the paper is not aligned with the tear edge of the top cover ofthe printer, you can adjust it. Inserted paper needs to be torn off if necessary andretracted to park position.Press the Setup key. The printer changes to setup mode.Press the Adjust (2) key.Press the Tear (4) key.Swing the soundproofing cover towards the front (see “Printer at a glance”,page 5). The tear edge is located at the front side of the paper output opening.Press the < (2) or > (3) key to move the perforation to the desired position. Con-firm the input by pressing the Set (1) key.Confirm the input again by pressing the Setup key. The printer is reset to the initialstatus.The correction made – a maximum of approx. 1" (2.5 cm) in each direction – willbe retained after switching the printer off. It can be set separately for each paperpath.Adjust PaprpathMenu Char OnlineSetup21 3 4TOFHead Tear OnlineSetup21 3 4TearAdj= 00/72"*Set < > Exit OnlineSetup21 3 4Quick Start - en .fm Seite 26 Donnerstag , 17. Juni 2004 9:36 09