11Initialization Settings1. Network Initialization Settings... from the Network Settings UtilityTo connect to a network, it is necessary to enter an IP address and Subnet Mask that areappropriate for your network. Under Network Initialization Settings make the appropriatesettings for your [IP address] and [Subnet Mask]. More detailed settings can be made in [DetailedNetwork Settings].2. Remote Unit Registration... from RTR-5W for WindowsIn order to carry out wireless communication between an RTR-5W base station and a RemoteUnit, please register Data Loggers as Remote Units as follows.1. Create a Location2. Create Group(s)3. Register Remote Unit(s)4. Depending on the communication status, register and position a Repeater*Up to 64 Remote Units can be registered to one Location.Basic Operations1. Recording Settings... from RTR-5W for WindowsBy setting the Recording Interval, the Recording Start Date / Time and the Recording Mode,recording will begin at the set date and time.*When using RTR-52Pt make sure to make any necessary sensor settings.2. Download Data... from RTR-5W for WindowsData recorded in the Remote Unit will be downloaded and saved in your computer as a datafile. Downloaded temperature and humidity data can be viewed in [Temp / Humidity Graph],downloaded Voltage, Pulse and Temp / Humidity data can be viewed in [Multi-scale Graph] anddownloaded Event data can be viewed using [Event Viewer].