465. After making entries click the [Set] Button to send the settings to the RTR-5Wthat were entered into the [Access Settings] Bar and the settings for the Locationwill be completed.[Get Time] ButtonClicking this button will start communication with the Location and will retrieve and displaythe time settings from the Location's internal clock. Due to network delays, this may be a fewseconds off from the time you receive the settings.[Set Clock] ButtonIf SNTP settings have not been made, click this button to make RTR-5W clock settings. If anSNTP server is not being used, please make sure to reset the internal clock to your local timebefore using. This is necessary because each time the RTR-5W is rebooted the internal clock isautomatically reset to its default setting. See p.36-38 for details.[Reboot] ButtonThis will reboot the RTR-5W. If you have updated the RTR-5W internal script or in some othercases it is necessary to reboot the system. Please read the following "NOTE" about the rebootingof an RTR-5W.[Send Daylight Saving Time Info to RTR-5W] ButtonClicking this button will send the Daylight Saving Time info to the RTR-5W at the selectedLocation. If a change is made to the [Daylight Saving Time Setting], make sure to send the newsettings. Note that to activate the Daylight Saving Time Setting, the RTR-5W may automaticallyreboot after the Info has been sent to the RTR-5W. Please read the following "NOTE" about therebooting of an RTR-5W.NOTE: About the Rebooting of an RTR-5W- By rebooting an RTR-5W, the unit’s internal clock will automatically return to its default settings. If SNTPsettings have not been made, please make sure to reset the internal clock to your current local time beforeusing. See p.36-38 for details.- By rebooting an RTR-5W, all warning logs, readings and graphs currently displayed in the browser (datafiles for transfer) will be erased. Note however that, when an RTR-5W is rebooted, the recorded datalogged in the Remote Unit will not be affected.
