Tascam 302mkII Owner's Manual

Also see for 302mkII: Technical documentation Service manual

Contents

TASCAM 302MKII 159. To start dubbing, press PLAY on deck 2 of themaster unit. Deck 2 of the master and all the slavedecks will go into Record mode, simultaneously.The target decks all configure themselves to theDolby system and the record level settings usedwhen originally recording the source tape. Settingsof the INPUT and REC BAL controls and theDOLBY NR switch on the individual target decksare overridden.10. To stop dubbing, press STOP on deck 2 of themaster.NOTEUpon pressing STOP on deck 1 or deck 2 of anyslave unit, that deck cannot function any more.To use it as a slave again, first press EJECT.Suggestion: You can hold down RECORD and pressSTOP on deck 2 of the master to record a 4-secondsilence on all the target tapes at the same time.Alternatively, you can press the REC MUTE button fordeck 2 on the optional remote control unit connectedto the master.In this application, deck 1 of the master is left unused.1. If you haven’t done so yet, interconnect the units,as shown on page 13, then connect the line outputfrom the source unit to the DECK 2 INPUT jackson the flrst unit.2. Switch power on to all the units.3. Set the OFF/SLV/MSTR switch to MSTR on the unitto which the source unit is connected, and SLV onall the other units.4. Set the REV MODE switch to Ä on each unit.5. Insert cassette tapes into deck 2 of the master unitand decks 1 and 2 of the slaves.Suggestion: There is no problem if there are slavesinto which no tape is inserted.6. If need be, locate the tapes to their beginnings bypressing the REW button on deck 2 of the masterunit.7. Check to see that all the tapes are ready forrecording on their forward sides, as confirmed bythe forward PLAY LED blinking on the individualdecks. If any reverse PLAY LEDs are blinking,press the Á button on deck 2 of the master.8. Hold down PAUSE and press RECORD on deck 2of the master. This puts all the slaves into RecordReady mode.Recording an External Source onto Multiple Cassettes SimultaneouslyMultiple-unit System Operation