Tascam CC-222SL Owner's Manual

Also see for CC-222SL: Specification sheet Technical documentation

TASCAM CC-222SL 1The following are the menu items that can be set using theMENU key. The majority of them affect disc recording.Pressing the MENU key repeatedly cycles through themenu items. Not every menu item is available in everysituation (for instance, if a digital input is not selected, thedigital direct option is not shown).1 Press the MENU key until the desired menu isshown on the display.2 Turn the MULTI DIAL to change a value or setting.3 Push the MULTI DIAL to confirm the change and exitthe menu item.Alternatively, keep pressing the MENU key until thenormal time counter is displayed.Menu operationMenu displayed Meaning Default (factory) value Described in:SRC Sampling rate converter ON “Sampling Frequency conversion” on page 20VOLUME Digital volume control 0dB “Signal volume” on page 20A_TRK Automatic track increment LEVEL “Automatic track division” on page 25A_TIME Automatic track increment 1 min “Automatic track division” on page 25S_LVL Sound (trigger) level for track increment –24 dB (analog) “Setting the trigger level” on page 24 and–54 dB (digital) “Using the trigger level” on page 24COPY ID Copy-protection on recorded discs 1 GEN “Copy-protection” on page 26FADE IN Allows fade in of recorded discs 3s “Fade-in and fade-out” on page 25FADE OUT Allows fade out of recorded discs 3s “Fade-in and fade-out” on page 25DUB>VOL Bypasses (THRU) or enables (ON) THRU “Dubbing tapes from the CD deck” oninternal volume when dubbing from page 30 and “Dubbing from tape to disc”tape to disc or disc to tape on page 23PHONO Sends the PHONO inputs to DISC or DISC “Recording tapes from the PHONO deck”TAPE on page 31 and “Recording to disc fromthe RIAA PHONO inputs” on page 22MP3 DIR Records directly from digital source OFF “Directory playback setting” on page 19to discOUT2 Assign the OUTPUTS2 jacks to TAPE TAPE “OUT2 setting” on page 32or DISCMenu configuration3 – Menu operation