IMPORTANT SAFETY PRECAUTIONS2 TASCAM CD-200iThe exclamation point within an equilateral triangle is intended to alert the user tothe presence of important operating and maintenance (servicing) instructions in theliterature accompanying the appliance.The lightning flash with arrowhead symbol, within equilateral triangle, is intendedto alert the user to the presence of uninsulated “dangerous voltage” within theproduct’s enclosure that may be of sufficient magnitude to constitute a risk ofelectric shock to persons.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVECOVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.WARNING: TO PREVENT FIREOR SHOCK HAZARD, DONOT EXPOSE THISAPPLIANCE TO RAIN ORMOISTURE.This appliance has a serial number located on the rearpanel. Please record the model number and serialnumber and retain them for your records.Model numberSerial numberIn North America use only on 120V supply.CE Marking Informationa) Applicable electromagnetic environment: E4b) The average half-cycle r.m.s. inrush current1. On initial switch-on : 0.4Arms2. After a supply interruption of 5s : 0.14ArmsTO THE USERThis equipment has been tested and found to complywith the limits for a Class A digital device, pursuant toPart 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmfulinterference when the equipment is operated in acommercial environment. This equipment generates,uses, and can radiate radio frequency energy and,if not installed and used in accordance with theinstruction manual, may cause harmful interference toradio communications.Operation of this equipment in a residential area islikely to cause harmful interference in which case theuser will be required to correct the interference at hisown expense.CAUTIONChanges or modifications to this equipment notexpressly approved by TEAC CORPORATION forcompliance could void the user's authority to operatethis equipment.For U.S.A.