Tascam CD-200i Owner's Manual

Also see for CD-200i: Service manual Owner's manual

32 TASCAM CD-200iOperation messagesThe following messages are shown on the main display according to the operation of the CD player.Message Messagelit or blinking Meaning Response-CLEAR- Lit All programs have been cleared.CLOSE Lit The disc tray is closing.NO DISC Lit There is no disc or the disc cannot beverified.NO FILES Lit The disc has no files that can be playedback.Load a disc that has MP3 or WAVfiles.NO NAME Lit There is no artist data or no file data thatcan be displayedText information must be 7-bit ASCIIcompatible text to be displayed.NO TITLE Lit There is no title data that can be displayed. Text information must be 7-bit ASCIIcompatible text to be displayed.OPEN Lit The disc tray is open.TOC READ Lit TOC information is being read.NO IPOD Lit No iPod is connected. Connect an iPod.-IPOD- Lit The output source is set to iPod.-AUX- Lit The output source is set to AUX.Warning messagesIf an operation cannot be completed, one of the following messages is shown. It will appear for about two seconds beforedisappearing automatically.Message Messagelit or blinking Meaning ResponseNO PGM Lit No program has been created. Add tracks to the program.PGM FULL Lit You cannot add more than 99 tracks to theprogram.Either stop trying to add to theprogram, clear the program, orreplace one of the tracks in theprogram.Error messagesIf one of the following error messages is shown, please refer to the Response column and try to resolve it. If this does notcorrect the problem, please contact a TEAC repair center.Message Messagelit or blinking Meaning ResponseCOMM ERR Blinking Cannot communicate with the CD drive. Contact a TEAC repair center.COMM ERR Lit An error occurred during communicationwith the CD drive. Contact a TEAC repair center.DEC ERR Lit The file type is not supported or otherwisecould not be played Change the discDISC ERR Lit The TOC or file system could not be read,or focus adjustment was not possible. Clean or change the disc.DRV ERR Lit The CD drive hardware is broken. Contact a TEAC repair center.READ ERR Lit The track cannot be accessed. Clean or change the disc.6 − Message Lists