Tascam CD-RW900 Owner's Manual

Also see for CD-RW900: Consultant’s Specification Owner's manual Technical information Specifications Specifications

16 TASCAM CD-RW900Track search1 Press the ∆ / ˚ search key continuously on thefront panel, or the SEARCH ∆ / ˚ key on theremote control.2 To stop the search function, simply release the∆ / ˚ or the SEARCH key.NOTEThe search function does not operate with MP3 discs.Normal searchDirect searchOperation variationsEven if the final second is not input, playback will beginfrom the selected point after pressing the ENTER orPLAY key. Or, if you press the READY key, the unit willenter the playback standby mode at the selected point.Specifying a track number onlyAfter inputting the track number, press the ENTERor PLAY key to begin playback of that track, or theREADY key to cue the track and enter playbackstandby mode.NOTEInstead of inputting the three-digit track number, youcan input only the desired track number.Example: To specify track 3, input only “3”.Specifying to the minuteAfter inputting the three-digit track number and thenumber of minutes after the start of the track, pressthe ENTER or PLAY key to begin playback of thattrack, or the READY key to cue the track and enterplayback standby mode.Example: To specify 1 min 00 sec from the start oftrack 2, input “002 001”NOTEFollowing the above example, if “0021” is input, thesame position will be located.By specifying time from the start of a certain track, youcan start playback from a specified point of a specifiedtrack.Basic operation1 During stop, play or playback standby modes, usethe number keys on the remote control to input thethree-digit track number (such as 002 for track 2),then the desired elapsed time (***min **sec) from thestart of that track.Example: To specify 1 min 30 sec from the start oftrack 2, input “002 001 30”.During input, the counter in the display will flash.Pressing the CLEAR key cancels the input at anystage during input.NOTERegardless of the time display mode (refer to “Time dis-play switching on page 18), the time from the start ofthe specified track is displayed.During stop or playback modes, when the final digitis entered, the desired position is automatically lo-cated and playback will begin from the desired point.During playback standby mode, at the desired pointthe unit will enter playback standby mode.NOTE≠ If a point which does not exist is entered, setting op-eration will be cancelled.4−Playback operationsUsing the number keys on the remote control, the num-ber of the desired track can be entered directory. Evennumbers with two or three digits can be entered easily.For example:Track 9: press ‘9’ and 009 will be displayed.Track 12: press ‘1’ and ‘2’ and 012 will be displayed.Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will bedisplayed.After input, press the PLAY key to start playback. Or,the READY key to cue the track at its head positionand enter playback standby mode.You can also enter the track number and start playbackby pushing the MULTI JOG dial or using the ENTERkey.NOTEThis function cannot be used in Program or Randommode.Selecting by track number≠ The direct search function cannot be used in pro-gram or random mode.≠ For MP3 discs, time cannot be specified within atrack. However, if you input the three-digit tracknumber, playback will begin from the start of thattrack.