Tascam CD-RW900 Owner's Manual

Also see for CD-RW900: Consultant’s Specification Owner's manual Technical information Specifications Specifications

TASCAM CD-RW900 27Erasing tracksThis operation erases the specified track and all sub-sequent tracks from a recorded CD-RW disc.1 During stop, press the ERASE/DEL key on the frontpanel or the ERASE key on the remote control. Se-lect the ERASE TRACK? rotating the MULTI JOGdial or pressing the SKIP keys on the remote con-trol.To cancel the operation at this point, press theERASE/DELor the ERASE key again.2 Push the MULTI JOG dial or press the ENTER keyto enter the function.The display shows Erase XX-XX (the number of thefirst track and last track to be erased).Rotate the MULTI JOG dial or press the SKIP key tochange the track numbers you desire to erase.To cancel the operation at this point, press theERASE/DELor the ERASE key again.3 Push the MULTI JOG dial or press the ENTER keyto operate the function.The display shows Sure?To cancel the operation at this point, press theSTOP key.4 Push the MULTI JOG dial or press the ENTER keyagain to proceed the operation.The display shows the Erase flashing and the re-maining time. The unit starts counting down from atime shown on the display.NOTEOnce the operation is proceeded, the STOP key cannotfunction. Please confirm before the operation.5 When the tracks have been erased, Complete willappears on the display.Erasing a whole discWhen you want to erase a whole disc (all the tracks ona disc), follow the procedure below:1 During stop, press the ERASE/DEL key on the frontpanel or the ERASE key on the remote control. Se-lect the ERASE DISC? rotating the MULTI JOG dialor pressing the SKIP keys on the remote control.To cancel the operation at this point, press theERASE/DEL or the ERASE key again.2 Push the MULTI JOG dial or press the ENTER keyto enter the function.The display shows Sure?.To cancel the operation at this point, press theSTOP key.3 Push the MULTI JOG dial or press the ENTER keyagain to proceed the operation.The display shows the Erase flashing and the re-maining time. The unit starts counting down from atime shown on the display.NOTEOnce the operation is proceeded, the STOP key cannotfunction. Please confirm before the operation.4 When the disc has been erased, Complete appearsthen Blank Disc will appear on the display.Refreshing a discRefreshing the disc makes a disc usable again. This op-eration destroys all data on the disc.1 Load the disc, and the unit in stop mode, press theERASE/DEL key on the front panel or the ERASEkey on the remote control. Select the REFRESH?rotating the MULTI JOG dial or pressing the SKIPkeys on the remote control.To cancel the operation at this point, press theERASE/DEL or the ERASE key again.2 Push the MULTI JOG dial or press the ENTER keyon the remote control to enter the function.The display shows Sure?To cancel the operation at this point, press theSTOP key.3 Push the MULTI JOG dial or press the ENTER keyagain to proceed the operation.The display shows the Erase flashing and the re-maining time. The unit starts counting down from atime shown on the display.4 When the disc has been refreshed, Complete willappear on the display, and Blank disc shows up.6-After recordingErasing